| Peer-Reviewed

Di Linh Clay-pillared by Cetyltrimethyl Ammonium Bromide Used as an Antifouling Paint Additive

Received: 2 February 2017     Accepted: 14 February 2017     Published: 23 October 2017
Views:       Downloads:
Abstract

Di Linh (Lam Dong Province, Vietnam) clay was chemically treated and pillared by cetyltrimethyl ammonium bromide (CTAB) surfactant under different preparation conditions. The synthesized organoclays were characterized by XRD, FT-IR, SEM, TEM, BET…techniques. The insertion of CTAB into the treated Di Linh clay leads to a significantly increased basal spacing. These pillared clays were further used as a paint additive. The preliminary results indicated that the presence of such an additive has a significant improvement of the mechanical properties of the organoclay-added paint.

Published in International Journal of Oil, Gas and Coal Engineering (Volume 5, Issue 4)
DOI 10.11648/j.ogce.20170504.16
Page(s) 63-68
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Clay, Organoclay, Additive, Antifouling Paint

References
[1] T. R. Jones, The properties and uses of clays which swell in organic solvents, Clay Miner. 18 (1983) 399-410.
[2] Q. Zhou, R. L. Frost, H. He, Y. Xi, Changes in the surfaces of adsorbed p-nitrophenol on methyltrioctadecylammonium bromide organoclay—An XRD, TG, and infrared spectroscopic study, J. Colloid Interface Sci. 314 (2007) 405.
[3] N. Yildiz, R. Gonulsen, H. Koyuncu, A. Calimli, Adsorption of benzoic acid and hydroquinone by organically modified bentonites, Colloid Surf. A 260 (2005) 87.
[4] R. A. Vaia, S. V. Scanlon, E. P. Giannelis, New polymer electrolyte nanocomposites: Melt intercalation of poly (ethylene oxide) in mica-type silicates, Adv. Mater. 7 (1995) 154.
[5] P. M. Barata-Rodrigues, T. J. Mays, G. D. Moggridge, Structured carbon adsorbents from clay, zeolite and mesoporous aluminosilicate templates, Carbon 41, 2231 (2003)
[6] M. A. Osman, Organo-vermiculites: synthesis, structure and properties. Platelike nanoparticles with high aspect ratio, J. Mater. Chem. 16 (2006) 3007.
[7] U. F. Alkaram, A. A. Mukhlis, A. H. Al-Dujail, The removal of phenol from aqueous solutions by adsorption using surfactant-modified bentonite and kaolinite, J. Hazard. Mater 169 (2009) 324.
[8] Nguyen Tien Thao, Pham Thi Hien, Synthesis of porous carbon materials by the replication of organoclays, Asian Journal of Chemistry, 25 (14) (2013) 8136-8140.
[9] Paint Testing Manual, Physical and chemical examination of paint, varnishes, lacquers, and colors, Vietnam Standard Protocol-2092-2005 (Viscosity), Protocol-2097-1993 (Adhesion), Protocol- 2099-2007 (T-bent test), Protocol-2100-2007 (impact test); Oleske, Joseph V, Paint and Coating Testing Manual (14th Edition), ASTM International, 1995.
[10] D. T. B. Tennakoon, R. Schlogl, T. Rayment, J. Klinowski, W. Jones and J. M. Thomas, The characterization of clay-organic systems, Clay Miner. 18 (1983) 357-371.
[11] Yunfei Xi, Qin Zhou, Ray L. Frost, Hongping He, Thermal stability of octadecyltrimethylammonium bromide modified montmorillonite organoclay, Journal of Colloid and Interface Science 311 (2007) 347–353.
[12] Yunfei Xi, Ray L. Frost, Hongping He, Modification of the surfaces of Wyoming montmorillonite by the cationic surfactants alkyl trimethyl, dialkyl dimethyl, and trialkyl methyl ammonium bromides, Journal of Colloid and Interface Science 305 (2007) 150–158.
[13] Beena Tyagi, Chintan D. Chudasama, Raksh V. Jasra, Extermination of structural modification in acid activated montmorillonite clay by FT-IR spectroscopy, Spectrochimical Acta Part A 64 (2006) 273–278.
[14] Lizhong Zhu, Runliang Zhu, Liheng Xu, Xiuxiu Ruan, Influence of clay charge densities and surfactant loading amount on the microstructure of CTMA–montmorillonite hybrids, Colloids and Surfaces A: Physicochem. Eng. Aspects 304 (2007) 41–48.
[15] Rui Liu, Ray L. Frost, Wayde N. Martens, Yong Yuan, Synthesis, characterization of mono, di and tri alkyl surfactant intercalated Wyoming montmorillonite for the removal of phenol from aqueous systems, Journal of Colloid and Interface Science 327 (2008) 287–294.
[16] Jana Hrachova, Jana Madejova, Peter Billik, Peter Komadel, Vladimir Stefan Fajnor, Dry grinding of Ca and octadecyltrimethylammonium montmorillonite, Journal of Colloid and Interface Science 316 (2007) 589–595.
[17] M. R. Bagherzadeh, F. Mahdavi, Preparation of epoxy–clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating, Progress in Organic Coatings 60 (2007) 117–120.
[18] Krzysztof Kowalczyk, Tadeusz Spychaj, Epoxy coatings with modified montmorillonites, Progress in Organic Coatings 62 (2008) 425–429.
[19] Lauren N. Butler, Christopher M. Fellows, Robert G. Gilbert, Effect of surfactants used for binder synthesis on the properties of latex paints, Progress in Organic Coatings 53 (2005) 112–118.
Cite This Article
  • APA Style

    Nguyen Tien Thao, Nguyen Thi Thuy Khue. (2017). Di Linh Clay-pillared by Cetyltrimethyl Ammonium Bromide Used as an Antifouling Paint Additive. International Journal of Oil, Gas and Coal Engineering, 5(4), 63-68. https://doi.org/10.11648/j.ogce.20170504.16

    Copy | Download

    ACS Style

    Nguyen Tien Thao; Nguyen Thi Thuy Khue. Di Linh Clay-pillared by Cetyltrimethyl Ammonium Bromide Used as an Antifouling Paint Additive. Int. J. Oil Gas Coal Eng. 2017, 5(4), 63-68. doi: 10.11648/j.ogce.20170504.16

    Copy | Download

    AMA Style

    Nguyen Tien Thao, Nguyen Thi Thuy Khue. Di Linh Clay-pillared by Cetyltrimethyl Ammonium Bromide Used as an Antifouling Paint Additive. Int J Oil Gas Coal Eng. 2017;5(4):63-68. doi: 10.11648/j.ogce.20170504.16

    Copy | Download

  • @article{10.11648/j.ogce.20170504.16,
      author = {Nguyen Tien Thao and Nguyen Thi Thuy Khue},
      title = {Di Linh Clay-pillared by Cetyltrimethyl Ammonium Bromide Used as an Antifouling Paint Additive},
      journal = {International Journal of Oil, Gas and Coal Engineering},
      volume = {5},
      number = {4},
      pages = {63-68},
      doi = {10.11648/j.ogce.20170504.16},
      url = {https://doi.org/10.11648/j.ogce.20170504.16},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20170504.16},
      abstract = {Di Linh (Lam Dong Province, Vietnam) clay was chemically treated and pillared by cetyltrimethyl ammonium bromide (CTAB) surfactant under different preparation conditions. The synthesized organoclays were characterized by XRD, FT-IR, SEM, TEM, BET…techniques. The insertion of CTAB into the treated Di Linh clay leads to a significantly increased basal spacing. These pillared clays were further used as a paint additive. The preliminary results indicated that the presence of such an additive has a significant improvement of the mechanical properties of the organoclay-added paint.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Di Linh Clay-pillared by Cetyltrimethyl Ammonium Bromide Used as an Antifouling Paint Additive
    AU  - Nguyen Tien Thao
    AU  - Nguyen Thi Thuy Khue
    Y1  - 2017/10/23
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ogce.20170504.16
    DO  - 10.11648/j.ogce.20170504.16
    T2  - International Journal of Oil, Gas and Coal Engineering
    JF  - International Journal of Oil, Gas and Coal Engineering
    JO  - International Journal of Oil, Gas and Coal Engineering
    SP  - 63
    EP  - 68
    PB  - Science Publishing Group
    SN  - 2376-7677
    UR  - https://doi.org/10.11648/j.ogce.20170504.16
    AB  - Di Linh (Lam Dong Province, Vietnam) clay was chemically treated and pillared by cetyltrimethyl ammonium bromide (CTAB) surfactant under different preparation conditions. The synthesized organoclays were characterized by XRD, FT-IR, SEM, TEM, BET…techniques. The insertion of CTAB into the treated Di Linh clay leads to a significantly increased basal spacing. These pillared clays were further used as a paint additive. The preliminary results indicated that the presence of such an additive has a significant improvement of the mechanical properties of the organoclay-added paint.
    VL  - 5
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Faculty of Chemistry, Vietnam National University Hanoi, Hanoi, Vietnam

  • Chimie Physique et Chimie Analytique, Université Paris Diderot, Paris, French

  • Sections